Access Controller Falco CTRL-2DRPoE-CF-PCB
Native POE Access Controller
FALCO PoE Door Access Controller offers an easy, fast, cost effective solution for your access control system without the need to install power points and electrical cabling. It only applies to door control – and is not compatible with alarm modules, turnstile and elevators
- Integrated Power Supply Module with Backup Battery Charger
- Peer to Peer Technology
- Power Monitoring
- ABS Casing
PoE Access Controller Specifications
| ㅤ | 1 Door |
2 Door |
MODEL No |
CTRL-1DRPoE-CF-PCB |
CTRL-2DRPoE-CF-PCB |
Processing Unit |
Freescale CF microcontroller 32 bits | |
Memory |
1024 kb EEPROM & 16 Mb FLASH | |
Card Capacity |
70k (expansible to 150k) | |
Event capacity on memory buffer |
40k (expansible to 80k) | |
Compatible card protocols |
26 bit -64 bit | |
Network Protocols |
TCP/IP, ARP, WEB | |
Input Functionality |
Fire input/ exit push button/ door contact/ tamper | |
Controller Redundancy |
Support 2 destination IP addresses | |
Operating Temperature |
0⁰C ~ 55⁰C / 32⁰ ~ 165⁰F (subject to battery specification) | |
Humidity |
0 ~ 85% Humidity (relative noncondensing) | |
Power Source Requirement |
POE hub 15.4W(min each port) | |
Battery Charger |
12 VDC / 7AH (Onboard battery backup charger/ power supply module max 2.0A) | |
Security Encryption |
AES- 128 | |
Certifications |
CE RoHS | |
Board Dimensions |
PCB board = 137 (L) x117 (W) x 15.5 (H)mm / 25g | |
Output Tamper |
✓ |
✓ |
Support Readers |
1 in & 1 out |
2 in & 2 out |
Support Doors |
1 Doors |
2 Doors |
Elevator Floors |
✗ |
✗ |
Support Input Board |
✗ |
✗ |
Support Output Board |
✗ |
✗ |
Support Fire Alarm Input |
✓ |
✓ |
Built-in Web Server |
✓ |
✓ |